This is the floor board that is under the front seats. It runs the entire width of the car and has tapered ends. This board is attached to the car using 8 flat head machine screws (four along the front edge and four along the back edge) with square nuts on the bottom.
Made exactly like the original. The individual boards run front to back and each board is sized as the original. Where individual boards need to be joined together to make a larger one, the correct tongue and groove joint is used. The individual boards fit together using rabbet joints and bottom of the corners are beveled. The boards are nailed to two wooden cleats on the bottom using the correct size nails (clinched on the bottom just as the original).
Our Quality reproduction floor boards are manufactured to fit exactly like the originals. These plywood floorboards offer a less expensive alternative to the original hardwood versions. They are are made of furniture grade 5/8 birch plywood and are dimensionally the same as the originals.