This is the rear floor board for the 26-27 Tudor Sedan. It the floor board that is just in front of the rear seat. This is the one piece version of this floorboard.
The individual boards run front to back and each board is sized as the original. Where individual boards need to be joined together to make a larger one, a tongue and groove joint is used as per the originals. The individual boards fit together using rabbet joints. The boards are nailed to two wooden cleats on the bottom using the correct size nails (clinched on the bottom just as the original). The bottom of the corners are beveled as per the original. The 1926-27 board has a finger hole is provided as on the original to make it easier to remove to service the battery.
NOTE: There are two versions of this floor board - a one piece and a two piece. The two piece consists of a left and right section which are connected using a half-lap joint.
Our Quality reproduction floor boards are manufactured to fit exactly like the originals. These plywood floorboards offer a less expensive alternative to the original hardwood versions. They are are made of furniture grade 5/8 birch plywood and are dimensionally the same as the originals.