Request a catalog and we will send it to you in the mail for free.

Spindle body, right (passenger’s side). USED LANG'S TECH TIP! Very important! To insure that the spindles are on the correct sides of the car, note that one side of the hole for spindle arm is flat and the other side has a slight taper. The side with that is a flat face forward. To determine the correct side for bearings and nuts note that as you put on the outer bearings (#2837 and 2838) and the spindle nuts (#2707 and 2708), be sure that you thread them on in the opposite direction from the direction the wheel turns when driving forward. If the bearings and nuts will not thread on in the correct direction, it means you have the spindles on the wrong sides. Putting them on the wrong side will cause then to tighten when driving and jam the wheel ruining the bearings

There are currently no FAQ for this item.

To ask a question about this item please press and fill out the form.